Sublimation Coating – Adhesion Promoter Subli Glaze – 250ml

Description

The only DIY sublimation coating option, Subli GlazeTM, is made to allow sublimation decoration on a variety of surfaces, including ceramic, wood, glass, plastic, metal, or stone. With these outstanding value coatings, you can quickly and effectively prepare substrates for sublimation, extending your creative options and product line.

In order for your chosen Subli GlazeTM product to adequately adhere to the substrate when you apply it to any hard surface with a smooth surface, such as metal, glass, or acrylics, Subli GlazeTM Adhesion Promoter is first necessary.

These coatings adhere to the North American CONEG rules as well as the EU REACH regulations for food safety, and compliance with the relevant legislation is monitored at every stage of manufacture. assuming they are used and cured according to instructions.

The Subli GlazeTM coating range is exclusively intended for use on hard surface substrates; it is not appropriate for the sublimation of fabrics (cotton).

Subli GlazeTM Adhesion Promoter: Use Instructions
Ensure that any surfaces that will be pre-treated are spotless, dry, and free of oil and debris.
To ensure even coverage, apply liberally with a soft, clean cloth over the area to be coated.

1. Subli GlazeTM Adhesion Promoter should be given around 30 seconds to adhere with the surface before any extra is removed with a clean wipe. Try to remove any grease or smudges when removing the extra material.
   Key Elements
   Allow the adhesion of your selected Subli GlazeTM product to smooth, hard substrates.
   After pressing a 250ml container, avoid coating and substrate separation.
   1-2 square metre coverage’Digi Coat’ was the previous name of this item.